Grade8.8 Carbon Carbon Composites Corrosion Resistance Bolt and Nut
- Grade 8.8 Chemshine carbon fiber carbon composites bolt and nut can
be used in aviation.
- The bolt and nut content is less than 0.08%.
- Caron carbon composites bolt and nut is based the whole carbon
felt,carbon fiber fabric using vapor deposition process to obtain
the carbon carbon composites.
- The bolt and nut also can be used in aerospace, metallurgy,
chemicals, machinery and other fields.
- It is high strength,low specific gravity,expansion coefficient,
high temperature resistance, corrosion resistance, abrasion
resistance,thermal shock resistance.
|Volume Density (g/cm3)||1.45-1.75|
|Thermal Conductivity (W/(m*k) )||10-14|
|Tensile Strength (Mpa)||≥120|
|Compression Strength (Mpa)||≥ 50|
|Ash Content (%)||≤0.07|
|Applicative Temperature Range (℃)|
|Carbon Content (%)||≥99.7|
|Processing Temperature (℃)||1200-2500|
Carbon fiber carbon composites material can be processed into
various shaped pieces,such as vacuum furnace blower carbon /carbon
blade, a variety of screws ,nuts, pipe,plate,bar,tray,rack.
|Mechanical properties||carbon composite has good mechanical properties of the strength and
elastic modulus, good wear and tear resistance|
|Physical properties||After high temperature treatment, the carbon composite has higher
carbon content, >99.5%, the density is low, the mechanical
properties are good. Due to good characteristic of high melting
point of carbon, high temperature resistance, corrosion resistance
and thermal shock performance, the carbon composite is resistant to
acid, alkali and salt|