Grade 6.0 Carbon Carbon Composites Abrasion Resistance Bolt and Nut
- Grade 6.0 Chemshine carbon fiber carbon composites bolts and nuts
are usually used in vacuum sintering furnace
- It is less ash content,less than 0.07%.
- Caron carbon composites bolt and nut is based the whole carbon
felt,carbon fiber fabric using vapor deposition process to obtain
the carbon carbon composites.
- It is high strength,low specific gravity,expansion coefficient,
high temperature resistance, corrosion resistance, abrasion
resistance,thermal shock resistance.
- The bolts and nuts can be used in aerospace, aviation, metallurgy,
chemicals, machinery and other fields.
|Volume Density (g/cm3)||1.45-1.70|
|Tensile Strength (Mpa)||≥120|
|Compression Strength (Mpa)||≥ 60|
|Carbon Content (%)||≥99.7|
|Ash Content (%)||≤0.07|
|Processing Temperature (℃)||1250-2500|
|Applicative Temperature Range (℃)|
|Thermal Conductivity (W/(m*k) )||10-14|
Carbon fiber carbon composites material can be processed into
various shaped pieces,such as vacuum furnace blower carbon /carbon
blade, a variety of screws ,nuts, pipe,plate,bar,tray,rack.
|Mechanical properties||carbon composite has good mechanical properties of the strength and
elastic modulus, good wear and tear resistance|
|Comprehensive performance evaluation|
carbon composite has good strength and elastic modulus at room
temperature; less production processes of carbon composite material
can save materials and manufacturing costs, and its more safety and
|Physical properties||After high temperature treatment, the carbon composite has higher
carbon content, >99.5%, the density is low, the mechanical
properties are good. Due to good characteristic of high melting
point of carbon, high temperature resistance, corrosion resistance
and thermal shock performance, the carbon composite is resistant to
acid, alkali and salt|